How to Fix a Dead Kia Picanto Key Fob
The Kia Picanto was built for the city. It zips through gaps in traffic that larger cars cannot and navigates width limits as if they're not even there. Despite its shabby appearance it's loaded with plenty of equipment.
There are many reasons why the key fob that you have on your kia Picanto may not function. A dead battery is probably the most common cause.
Dead Coin Battery
A dead battery is the most frequent reason of a Kia Picanto's key fob not working. Usually, the key fob will display warning signs prior to it dying and loses range or having erratic behavior. If you observe these signs, it is best to replace the battery before it fails completely. Make sure to use the same replacement battery with the same voltage, size, and specification as your original one.
If the key fob is not working, you might be required to take it to an authorized dealer. This is the only way of ensuring the replacement is programmed correctly and compatible with your vehicle. If you try to program the key fob improperly, the internal chip can be damaged and cease to function.
A receiver module that has acquired a fault is another possibility. This could be due to a damaged chip or simply wear and tear that occurs over time. It can be difficult to detect the symptoms of this problem, but it's important to investigate as soon as you can. If you're unable get your key fob to unlock or lock the doors, or even if the spare key isn't working then you should contact a dealer or service center to get help. They'll be able identify the issue and fix it for you.
Faulty Chip
The key fob contains an embedded chip that sends signals to the car's computer. If the chip becomes corrupted and the code is not transmitted correctly, the key fob will be sent correctly and the immobilizer will activate. This can be due to various reasons. One reason is a dead battery in the key fob. Water damage is another possibility. If the fob gets wet, it is very likely that it will cease to function.
A faulty chip could also be the reason for the Picanto fob won't turn on the engine. If you have replaced the battery and attempted to reprogramme the fob, but it isn't working, it could be because the circuit board is damaged. You will need to replace the circuit board If this is the case.
Press the button on the back to open the fob. Once you have done this, you will be able to remove the mechanical key. Then, follow the instructions below to replace the battery on the key fob. Be sure to use a new battery that is similar in size and voltage. The Fob might be damaged if you use the wrong type battery. After replacing the battery you must test it by pressing the lock button. If it works, you have a good Fob.
Faulty Receiver Module
The key fob you have is subjected to lots of abuse and isn't completely indestructible. Over time the battery contacts and buttons on your key fob might become damaged. Luckily, it's pretty easy to repair this yourself with some simple tools.
The fob has to send a message to the receiver inside your car in order for it to function. If the module is defective, your fob won't be in a position to start or open the vehicle. There are a variety of possible causes of this problem The first thing to try is resetting the fob.
This is usually accomplished by disconnecting the battery with 12 volts in the fob and letting it drain completely. Then, reconnect the positive and negative cables in reverse order.
If the battery is in good shape and the fob doesn't have any water damage, the problem might be with the signal. This can be due to several factors, including interference from nearby transmitters and objects that operate on the exact same frequency band as the Receiver of Picanto.
Key fobs are constructed with rubber seals to keep the chip inside from getting wet. However, if kia replacement key are submerged for a long period of time they could be destroyed. This is the reason it's vital to always keep your key fob away from water and only choose a keyfob with a waterproof design.
Faulty Programming
A Kia Picanto key fob is an ideal way to open and start your car. It can also be used to control the features in your car. It is crucial to understand how to use the key fob correctly, especially when driving in bad weather or if you have limited mobility. Fortunately, there are plenty of Kia Picanto key fob tips to assist you in this!
If your key fob stopped functioning out of the blue, it could have an issue with its internal chip. This is a rare event but it's possible. It is best to consult an Kia dealer to diagnose the cause of the issue.
You can also try to reset the Picanto keyfob. The procedure is fairly simple and can be carried out at home. The first step is to remove the key fob from the ignition switch. Then, connect the diagnostic tool to the OBDII port under the dash and turn on the engine. The diagnostic tool will seek out information regarding your Picanto. This includes the VIN, the make, and model.
You can also check the battery for dead coin battery. The metal clips in the key fob hold the battery and complete the circuit. If the retaining clip is not secure it could disrupt the flow of electricity causing a loss in functionality.